⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Clay County › Sabin (56580)

Sabin, MN (56580): well depth, water level & drilling cost

✓ 188 CWI records · Clay County

120 ftmedian well depth
89 ft–172 fttypical depth range
12 ftmedian static water level
75 gpmmedian yield (179 tests)

How deep are wells in Sabin (56580), Minnesota?

The median drilled well depth in Sabin (56580) is 120 ft, based on 188 wells with recorded depths in the state CWI database. Half fall between 89 ft and 172 ft; 90% are shallower than 245 ft.

How much does it cost to drill a well in Sabin (56580)?

Applying published per-foot rates to the local median depth of 115 ft: drilling and casing alone typically runs $2,875–$7,475; a complete system including pump, pressure tank, and hookup typically runs $6,900–$11,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Sabin (56580)?

The median static water level is 12 ft below ground surface (middle half of wells: 8 ft–18 ft), from 141 measurements.

Pull every recorded well near a Sabin (56580) address — $19

Drilled depth distribution

0–50 ft 0 50–100 ft 72 100–150 ft 48 150–200 ft 37 200–300 ft 25 300–400 ft 6 400–600 ft 0 600+ ft 0
Looking at a specific property in Sabin (56580)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Clay County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.