⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Todd County › Eagle Bend (56446)

Eagle Bend, MN (56446): well depth, water level & drilling cost

✓ 216 CWI records · Todd County

130 ftmedian well depth
82 ft–156 fttypical depth range
28 ftmedian static water level
40 gpmmedian yield (201 tests)

How deep are wells in Eagle Bend (56446), Minnesota?

The median drilled well depth in Eagle Bend (56446) is 130 ft, based on 214 wells with recorded depths in the state CWI database. Half fall between 82 ft and 156 ft; 90% are shallower than 204 ft.

How much does it cost to drill a well in Eagle Bend (56446)?

Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Eagle Bend (56446)?

The median static water level is 28 ft below ground surface (middle half of wells: 18 ft–40 ft), from 147 measurements.

Pull every recorded well near a Eagle Bend (56446) address — $19

Drilled depth distribution

0–50 ft 13 50–100 ft 60 100–150 ft 70 150–200 ft 46 200–300 ft 24 300–400 ft 1 400–600 ft 0 600+ ft 0
Looking at a specific property in Eagle Bend (56446)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Todd County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.