⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Todd County › Bertha (56437)

Bertha, MN (56437): well depth, water level & drilling cost

✓ 197 CWI records · Todd County

103 ftmedian well depth
67 ft–140 fttypical depth range
31 ftmedian static water level
30 gpmmedian yield (176 tests)

How deep are wells in Bertha (56437), Minnesota?

The median drilled well depth in Bertha (56437) is 103 ft, based on 194 wells with recorded depths in the state CWI database. Half fall between 67 ft and 140 ft; 90% are shallower than 184 ft.

How much does it cost to drill a well in Bertha (56437)?

Applying published per-foot rates to the local median depth of 113 ft: drilling and casing alone typically runs $2,825–$7,345; a complete system including pump, pressure tank, and hookup typically runs $6,780–$11,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Bertha (56437)?

The median static water level is 31 ft below ground surface (middle half of wells: 20 ft–47 ft), from 136 measurements.

Pull every recorded well near a Bertha (56437) address — $19

Drilled depth distribution

0–50 ft 10 50–100 ft 82 100–150 ft 66 150–200 ft 24 200–300 ft 12 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Bertha (56437)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Todd County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.