⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Olmsted County › Rochester (55904)

Rochester, MN (55904): well depth, water level & drilling cost

✓ 369 CWI records · Olmsted County

369 ftmedian well depth
276 ft–455 fttypical depth range
100 ftmedian static water level
25 gpmmedian yield (220 tests)

How deep are wells in Rochester (55904), Minnesota?

The median drilled well depth in Rochester (55904) is 369 ft, based on 364 wells with recorded depths in the state CWI database. Half fall between 276 ft and 455 ft; 90% are shallower than 550 ft.

How much does it cost to drill a well in Rochester (55904)?

Applying published per-foot rates to the local median depth of 400 ft: drilling and casing alone typically runs $10,000–$26,000; a complete system including pump, pressure tank, and hookup typically runs $24,000–$40,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Rochester (55904)?

The median static water level is 100 ft below ground surface (middle half of wells: 32 ft–163 ft), from 303 measurements.

Pull every recorded well near a Rochester (55904) address — $19

Drilled depth distribution

0–50 ft 1 50–100 ft 23 100–150 ft 14 150–200 ft 16 200–300 ft 60 300–400 ft 100 400–600 ft 123 600+ ft 27
Looking at a specific property in Rochester (55904)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Olmsted County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.