⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Aitkin County › Hill City (55748)

Hill City, MN (55748): well depth, water level & drilling cost

✓ 280 CWI records · Aitkin County

75 ftmedian well depth
59 ft–99 fttypical depth range
23 ftmedian static water level
19 gpmmedian yield (275 tests)

How deep are wells in Hill City (55748), Minnesota?

The median drilled well depth in Hill City (55748) is 75 ft, based on 280 wells with recorded depths in the state CWI database. Half fall between 59 ft and 99 ft; 90% are shallower than 142 ft.

How much does it cost to drill a well in Hill City (55748)?

Applying published per-foot rates to the local median depth of 71 ft: drilling and casing alone typically runs $1,775–$4,615; a complete system including pump, pressure tank, and hookup typically runs $4,260–$7,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Hill City (55748)?

The median static water level is 23 ft below ground surface (middle half of wells: 12 ft–38 ft), from 223 measurements.

Pull every recorded well near a Hill City (55748) address — $19

Drilled depth distribution

0–50 ft 33 50–100 ft 177 100–150 ft 44 150–200 ft 12 200–300 ft 7 300–400 ft 6 400–600 ft 1 600+ ft 0
Looking at a specific property in Hill City (55748)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Aitkin County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.