⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › St. Louis County › Brookston (55711)

Brookston, MN (55711): well depth, water level & drilling cost

✓ 171 CWI records · St. Louis County

95 ftmedian well depth
70 ft–141 fttypical depth range
30 ftmedian static water level
12 gpmmedian yield (167 tests)

How deep are wells in Brookston (55711), Minnesota?

The median drilled well depth in Brookston (55711) is 95 ft, based on 171 wells with recorded depths in the state CWI database. Half fall between 70 ft and 141 ft; 90% are shallower than 240 ft.

How much does it cost to drill a well in Brookston (55711)?

Applying published per-foot rates to the local median depth of 101 ft: drilling and casing alone typically runs $2,525–$6,565; a complete system including pump, pressure tank, and hookup typically runs $6,060–$10,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Brookston (55711)?

The median static water level is 30 ft below ground surface (middle half of wells: 18 ft–45 ft), from 143 measurements.

Pull every recorded well near a Brookston (55711) address — $19

Drilled depth distribution

0–50 ft 11 50–100 ft 83 100–150 ft 36 150–200 ft 16 200–300 ft 16 300–400 ft 9 400–600 ft 0 600+ ft 0
Looking at a specific property in Brookston (55711)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of St. Louis County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.