⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Stearns County › Kimball (55353)

Kimball, MN (55353): well depth, water level & drilling cost

✓ 777 CWI records · Stearns County

70 ftmedian well depth
57 ft–102 fttypical depth range
25 ftmedian static water level
20 gpmmedian yield (744 tests)

How deep are wells in Kimball (55353), Minnesota?

The median drilled well depth in Kimball (55353) is 70 ft, based on 777 wells with recorded depths in the state CWI database. Half fall between 57 ft and 102 ft; 90% are shallower than 157 ft.

How much does it cost to drill a well in Kimball (55353)?

Applying published per-foot rates to the local median depth of 71 ft: drilling and casing alone typically runs $1,775–$4,615; a complete system including pump, pressure tank, and hookup typically runs $4,260–$7,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Kimball (55353)?

The median static water level is 25 ft below ground surface (middle half of wells: 15 ft–35 ft), from 460 measurements.

Pull every recorded well near a Kimball (55353) address — $19

Drilled depth distribution

0–50 ft 100 50–100 ft 475 100–150 ft 113 150–200 ft 54 200–300 ft 29 300–400 ft 6 400–600 ft 0 600+ ft 0
Looking at a specific property in Kimball (55353)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Stearns County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.