⟁ Minnesota Well Data field records · 2026 survey

Minnesota Well Data › Anoka County › Francis (55070)

Francis, MN (55070): well depth, water level & drilling cost

✓ 457 CWI records · Anoka County

138 ftmedian well depth
94 ft–168 fttypical depth range
16 ftmedian static water level
40 gpmmedian yield (447 tests)

How deep are wells in Francis (55070), Minnesota?

The median drilled well depth in Francis (55070) is 138 ft, based on 456 wells with recorded depths in the state CWI database. Half fall between 94 ft and 168 ft; 90% are shallower than 197 ft.

How much does it cost to drill a well in Francis (55070)?

Applying published per-foot rates to the local median depth of 127 ft: drilling and casing alone typically runs $3,175–$8,255; a complete system including pump, pressure tank, and hookup typically runs $7,620–$12,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Francis (55070)?

The median static water level is 16 ft below ground surface (middle half of wells: 10 ft–20 ft), from 349 measurements.

Pull every recorded well near a Francis (55070) address — $19

Drilled depth distribution

0–50 ft 4 50–100 ft 126 100–150 ft 136 150–200 ft 148 200–300 ft 37 300–400 ft 2 400–600 ft 3 600+ ft 0
Looking at a specific property in Francis (55070)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Part of Anoka County well records.

Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.