Minnesota Well Data › Morrison County
Morrison County, Minnesota: well depth, water level & drilling cost
✓ 7,723 CWI records · verified 2026-06-29
How deep are wells in Morrison County, Minnesota?
The median drilled well depth in Morrison County is 72 ft, based on 7,698 wells with recorded depths in the state CWI database. Half of all wells fall between 54 ft and 101 ft; 90% are shallower than 146 ft. Wells drilled since 2016 have a median depth of 75 ft.
How much does it cost to drill a well in Morrison County?
Applying published per-foot rates to the local median depth of 75 ft: drilling and casing alone typically runs $1,875–$4,875; a complete system including pump, pressure tank, and hookup typically runs $4,500–$7,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Morrison County?
The median static water level is 18 ft below ground surface (middle half of wells: 11 ft–29 ft), from 5,727 measurements.
How much water do wells in Morrison County produce?
The median tested yield is 15 gpm (middle half: 12 gpm–20 gpm), from 7,073 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Morrison County address — $19
Drilled depth distribution
Who drills wells in Morrison County?
Drillers by number of wells completed in this county since 2016, per filed well records (Minnesota County Well Index).
| Driller | Wells since 2016 |
|---|---|
| KEMPENICH, C. | 101 |
| KEMPENICH, C | 96 |
| SYPNIESKI, D | 81 |
| HINES, R | 76 |
| HINES, R. | 60 |
| SEE REMARKS | 52 |
| SYPNIESKI, D. | 46 |
| WARREN, C. | 28 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Morrison County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Little Falls (56345) — 2,096 wells, median 60 ft
- Pierz (56364) — 1,347 wells, median 76 ft
- Royalton (56373) — 785 wells, median 75 ft
- Hillman (56338) — 758 wells, median 67 ft
- Cushing (56443) — 758 wells, median 102 ft
- Swanville (56382) — 354 wells, median 74 ft
- Randall (56475) — 338 wells, median 74 ft
- Bowlus (56314) — 303 wells, median 72 ft
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.