Minnesota Well Data › Kanabec County
Kanabec County, Minnesota: well depth, water level & drilling cost
✓ 4,239 CWI records · verified 2026-06-29
How deep are wells in Kanabec County, Minnesota?
The median drilled well depth in Kanabec County is 89 ft, based on 4,239 wells with recorded depths in the state CWI database. Half of all wells fall between 69 ft and 116 ft; 90% are shallower than 142 ft. Wells drilled since 2016 have a median depth of 88 ft.
How much does it cost to drill a well in Kanabec County?
Applying published per-foot rates to the local median depth of 88 ft: drilling and casing alone typically runs $2,200–$5,720; a complete system including pump, pressure tank, and hookup typically runs $5,280–$8,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Kanabec County?
The median static water level is 23 ft below ground surface (middle half of wells: 15 ft–34 ft), from 3,273 measurements.
How much water do wells in Kanabec County produce?
The median tested yield is 20 gpm (middle half: 15 gpm–30 gpm), from 4,162 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Kanabec County address — $19
Drilled depth distribution
Who drills wells in Kanabec County?
Drillers by number of wells completed in this county since 2016, per filed well records (Minnesota County Well Index).
| Driller | Wells since 2016 |
|---|---|
| GRAHAM, J | 82 |
| SEE REMARKS | 55 |
| GRAHAM, J. | 41 |
| KEMPENICH, C | 36 |
| JOHNSON, M | 35 |
| KELLER, J | 32 |
| GRAHAM, K | 30 |
| GRAHAM, JIM | 28 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Kanabec County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Mora (55051) — 1,997 wells, median 90 ft
- Ogilvie (56358) — 785 wells, median 94 ft
- Brook Park (55007) — 644 wells, median 83 ft
- Braham (55006) — 594 wells, median 94 ft
Method: medians computed from CWI records (water-supply wells only (domestic, irrigation, public/community supply, commercial, industrial) — monitoring, observation, test, injection, heat-pump and environmental boreholes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.